# *Adjustable Length Compensation* Available on all 700/770 and Bilz-style tapping attachments with machine tapers. # *Tension & Compression* Tap position returns +/- .001 after each cycle. Standard with all tapping attachments. Also available as tension only or rigid for synchronous tapping. # *Torque Spring* Torque is controlled by spring pressure. This is standard on 80 and 700 units. # *Torque Drive Ball* Standard on 80 and 700 torque controlled systems. Scallop size on the adapter precalibrates torque setting. # *Torque Sleeve* Automatically controls the amount of torque transmitted to the adapter. Makes torque adjustments unnecessary. # *Tap Adapter, Non-Coolant* Available for all standard tap sizes. Square drive ensures positive tap drive. # & 8. *Seals in Coolant Fed Adapters* COOLANT FEED TUBE Feeds coolant directly to the tap. Keeps coolant from contaminating the attachment's internal components. Restrictor allows for up to 800 PSI. Keeps coolant from backfeeding into attachments. # *Retention Ball* Retains adapter in the attachment while maintaining quick release during changeover. Acts as drive ball for positive drive adapters. # *Coolant-Feed* Feeds coolant along the tap shank. Reduces the need for expensive coolant through taps. # *Coolant-Through Feed* Feed from coolant through taps. 2007-01-17T12:17:24+00:00 false false 194 true false Adjustable Length Compensation Available on all 700/770 and Bilz-style tapping attachments with machine tapers. Tension & Compression Tap position returns +/- .001 after each cycle. Standard with all tapping attachments. Also available as tension o Numertap^® Selection Guide, Tapping, Products, Numertap C50-70TA5 Torque controlled non-coolant., Numertap C50-77TA4C Positive Drive Coolant-Fed. Numertap^® Selection Guide 48 2 false numertap_sup_reg_sup_selection_guide 2007-06-26T18:08:14+00:00 true