Toolholding Solutions

Parlec’s Toolholding Solutions are manufactured to maintain precision, functionality and durability. CAT, DIN, BT, HSK, NMTB, Chiron and Morse taper holders along with solutions for Balanced and Balanceable Heat Shrink, ER Collet Chucks, Power Milling and Shell Mill holders make up Parlec’s toolholding line.


Toolholding

Products

Single Angle Coolant Delivery Options

Single-Angle Coolant Back-Up Screw [+]

Single-Angle GOLDEN SEAL(TM) Coolant Seal [+]

High Pressure Coolant Options:

Single-Angle Sealed Collets (RPG)

  • Collet slots are sealed to prevent coolant escape.
  • Collapse range .005”.
  • Seals up to 600 PSI.

Single- Angle Coolant Back-Up Screws with Nylon Face

  • Work fine for large tools.
  • Tool shank must protrude through the collet.
  • Direct Link™ will work on short small diameter tools. Call your Parlec representative for more information.
  • Seals up to 600 PSI.

Single-Angle GOLDEN SEAL™ Coolant Seals

  • For use with straight-shank cutting tools with internal coolant-fed oil hole.
  • Use on existing collets, no special collet nut, tools or hardware required.
  • Golden Seal is simply inserted into the collet nut and the tool assembled as normal.
  • Golden Seal is an excellent means to stop collet contamination at any PSI from chips or grinding dust.
  • Seals 800 PSI.

Getting Coolant to the Cutting Tool:

Through-Flange

  • Available to the DIN 69871 Form B specification.

Through-Spindle

  • Through-holes are standard in all Parlec collet chucks. All collet chucks have back-up screws with through-holes.
  • Standard back-up screws are not designed for coolant pressure above 250 PSI, unless used in conjunction with additional coolant sealing system.