Tapping Solutions

Parlec’s Tapping systems provide superior application with the Numertap® system 770 providing the largest range of tapping. Rigid, tension only or tension and compression systems are standard, along with coolant or coolant groove adapters with up to 6" extension length.


Tapping

Products

Tap Adapters

Click to Enlarge [+]

Click to Enlarge [+]
  • Positive-drive, standard length for use in Numertap 770 Attachments.

Can be used to extend the range of N/C 700s. Will result in loss of torque control.

770 TAP ADAPTERS
Part Number Coolant Coolant Groove Tap Size Metric Tap Size (ANSI*) B C Tp
7716-#6 7716C-#6 7716CG-#6 #6 M3.5 1.25 2.10 1.19
7716-#8 7716C-#8 7716CG-#8 #8 M4 1.25 2.10 1.27
7716-#10 7716C-#10 7716CG-#10 #10 M5 1.25 2.10 1.51
7716-#12 7716C-#12 7716CG-#12 #12 - 1.25 2.10 1.51
7716-025 7716C-025 7716CG-025 1/4 M6 1.25 2.10 1.63
7716-031 7716C-031 7716CG-031 5/6 M7,M8 1.25 2.10 1.79
7716-037 7716C-037 7716CG-037 3/8 M10 1.25 2.10 2.00
7716-043 7716C-043 7716CG-043 7/16 - 1.25 2.10 2.06
7716-050 7716C-050 7716CG-050 1/2 M12 1.25 2.10 2.23
7716-056 7716C-056 7716CG-056 9/16 M14 1.25 2.10 2.40
7716-062 7716C-062 7716CG-062 5/8 M16 1.25 2.10 2.03
7716-068 7716C-068 7716CG-068 11/16 M18 1.61 2.25 2.17
7716-075 7716C-075 7716CG-075 3/4 - 1.61 2.25 2.32
7716-081 7716C-081 7716CG-081 13/16 M20 1.61 2.25 2.52
7716-087 7716C-087 7716CG-087 7/8 M22 1.61 2.25 2.71
7716-093 7716C-093 7716CG-093 15/16 M24 1.61 2.25 2.60
7716-100 7716C-100 7716CG-100 1" M25 1.61 2.25 3.05
7716-106 7716C-106 7716CG-106 1 1/16 & 11/8 M27 1.61 2.25 2.99/3.30
7716-118 7716C-118 7716CG-118 1 3/16 & 1 1/4 M30 1.61 2.25 2.56/2.88
7716-131 7716C-131 7716CG-131 1 5/16 & 1 3/8 M32 1.98 2.25 2.84/3.16
7716-144 7716C-144 7716CG-144 1 7/16 & 1 1/2 - 1.98 2.25 4.06/4.37
7716-162 7716C-162 7716CG-162 1 5/8 - 1.98 2.25 4.67
7717-006 7717C-006 7717CG-006 1/16 NTP - 1/8 NTPss - 1.25 1.375 1.06
7717-012 7717C-012 7717CG-012 1/8 NTP - 1.25 1.375 1.06
7717-025 7717C-025 7717CG-025 1/4 NTP - 1.25 1.375 1.18
7717-037 7717C-037 7717CG-037 3/8 NTP - 1.25 1.375 1.06
7717-050 7717C-050 7717CG-050 1/2 NTP - 1.61 2.25 1.53
7717-075 7717C-075 7717CG-075 3/4 NTP - 1.61 2.25 1.64
7717-100 7717C-100 7717CG-100 1" NTP - 1.61 2.25 1.93
7717-125 7717C-125 7717CG-125 1 1/4 NTP - 1.98 2.25 2.00
* For DIN, ISO or Imperial Metric Shanks, please call Parlec or your local Parlec representative.
** Coolant requires oil hole taps. Coolant groove uses standard taps. Both require coolant-fed unit.